Bộ Lưu Điện Makelsan POWERPACK RT PRO SERIES

Đánh giá

:

Giá

:

Xuất xứ: MAKELSAN

Tình trạng: Còn hàng

Mô tả :
  • Hãng sản xuất: MAKELSAN
  • Còn Hàng
Miễn phí vận chuyển nội thành Hà Nội, Hồ Chí Minh

Miễn phí vận chuyển nội thành Hà Nội, Hồ Chí Minh

Giao hàng ngay sau khi đặt hàng (áp dụng với Hà Nội & HCM)

Giao hàng ngay sau khi đặt hàng (áp dụng với Hà Nội & HCM)

Lỗi 1 Đổi 1, thủ tục đơn giản

Lỗi 1 Đổi 1, thủ tục đơn giản

Cung cấp đầy đủ hóa đơn, giấy chứng nhận hàng hóa CO, CQ rõ ràng.

Cung cấp đầy đủ hóa đơn, giấy chứng nhận hàng hóa CO, CQ rõ ràng.

Model            
  Capacity 6kVA / 5.4kW 10kVA / 9kW
  Input    
  Phase 3 Phase 4 Wires and Ground or Single Phase & Ground
  Rated Voltage 380/400/415Vac or 220/230/240VAC
  Voltage Range 208~478Vac or 120VAC-276VAC
  Frequency Range 40Hz-70Hz
  Power Factor ≥0.99
  Current THDi ≤5% (100% Nonlinear Load)
  Bypass Voltage Range Max. Voltage: +15% (Optional +5%, +10%, +25% ) Min. Voltage: -45% (Optional -20%, -30%)
  Frequency Protection Range: ±10%
  ECO Range Same As The Bypass
  Generator Input Support
  Output  
  Phase Single Phase & Ground
  Rated Voltage 220/230/240VAC
  Power Factor 0.9
  Voltage Regulation ±2%
  Frequency Utility Mode ±1%, ±2%, ±4%, ±5%, ±10% of The Rated Frequency (Optional)
  Battery Mode (50±0.2) Hz
  Crest Factor 3:1
  THD ≤2% With Linear Load; ≤5% With Non-linear Load
  Waveform Pure Sinewave
  Efficiency ECO Mode 97%; Normal Mode 90%
  Battery  
  Voltage Standard: 192Vdc; Optional Voltage: 216/240Vdc
  Backup Time Full Load 2min( Standard), Long Time Unit Depends on The Capacity of External Batteries
  Estimated Remaining Time Displayed on the LCD
  Recharge Time to 90% 8~10 Hours (Standard)
  Charging Current Maximum Current 6A; Charge Current can be Set According to Battery Capacity Installed.
  Battery Socket Hardwire
  Transfer Time Utility to Battery : 0ms; Utility to Bypass: 0ms
  Protection  
  Overload AC Mode Load 110%: Last 3min, 125%: Last 30S, 150%: Last 1S, 150% Shut Down UPS Immediately
  Bat. Mode Load 110%: Last 30S, 125%: Last 1S, 150%: Last 200ms, 150% Shut Down UPS Immediately
  Bypass Mode 40A (Input Breaker) 60A (Input Breaker)
  Short Circuit Hold Whole System
  Overheat Line Mode: Switch to Bypass; Backup Mode: Shut Down UPS Immediately
  Battery Low Alarm and Switch off
  Self-Diagnostics Upon Power On and Software Control
  EPO (Optional) Shut down UPS Immediately
  Battery Complies with EN62040-2
  Alarms  
  Audible & Visual Line Failure, Battery Low, Overload, System Fault
  Display  
  Status LED & LCD Line Mode, Backup Mode, Eco Mode, Bypass Mode, Battery Low, Battery Bad, Overload & UPS Fault
  Reading on the LCD Input Voltage, Input Frequency, Output Voltage, Output Frequency, Load Percentage, Battery Voltage, Inner
  Temperature & Remaining Battery Backup Time
  Physical  
  Dimension (W×D×H) (mm) 443×131(3U)×580
  Weight (kg) 23 25
  Input Connection Hardwire
  Output Connection Hardwire
  External Battery Connection Hardwire
  Comunication Interface USB (Optional) , RS485 (Optional) , Parallel Port (Optional) , SNMPCard (Optional) ,Centralized Monitoring Card (Optional)
  Environment  
  Operating Temperature 0~40°C
  Storage Temperature -25°C~55°C
  Humidity 0%~95% (Non-Condensing)
  Altitude <1500m
  Safeity Conformance CE,EN/IEC 62040-2,EN/IEC 62040-1-1

Sản phẩm liên quan